Schneider Electric

KNX/IP router REG‐K

  • Sale
  • Please log in to see prices or make an order

The KNX/IP router enables telegrams to be forwarded between different lines via LAN (IP) as a rapid backbone. The device can additionally serve as a programming interface in order to connect a PC with the KNX bus (e.g. for ETS programming with suitable ETS).
The IP address can be assigned dynamically via a DHCP server or via manual configuration (ETS parameter). The device operates in accordance with the KNXnet/IP specification using Core, device management, tunnelling and routing.

The KNX/IP router forwards telegrams in both directions whilst taking a filter table into account and can buffer up to 150 telegrams.
For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.

Supply voltage: DC 12-30 V (at DC 24 V 40 mA), AC 12-24 V
Device width: 2 modules = approx. 36 mm
In KNX, to be completed with:
- DC 24 V/0,4 A MTN693003
- AC 24 V/1A MTN663529

Also alternatively Power over Ethernet (PoE).
Note: With version 0C and higher, a total of up to 5 simultaneous connections is supported. Contents: With bus connecting terminal.

ETS Datafile