Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V
Rated frequency 50 and 60 Hz
Rated power at +45°C ambient temperature: up to 300 VA per output, up to 1000 VA with bundling of adjacent outputs, without minimum load per output
Electronic protection per output against overload, short circuit and temperature rise
Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5...2.5 mm2
Manual operation buttons on the device for switching, dimming and activation of direct mode operation
Bus-powered electronics
DIN-rail mounted device for mounting on rail TH35 according to DIN EN 60715
Additional functionalities GAMMA
Building site function for bundling the outputs and switching the building site lighting without prior configuration of the device via ETS
Object for surveillance of device function
Object for retrieval of status values
Per output with selectable operation mode (normal mode, one- or two-level timer mode, blinking)
Adjustable ON-/OFF-delay
Object Central Switching with separately configurable on/off delay selectable
Separately adjustable dimming time from 0% to 100% for switching on/off and dimming brighter/darker
Switch an output on or off by dimming brighter/darker
Configurable dimming curves for optimization of the dimming operation of lights
Additional status object switching and/or status object dimming value
Additional object for dimming with individually adjustable dimming time
Configurable maximum and minimum dimming value via parameter and object
Selectable object for limiting the maximum dimming value
Selectable object for reporting of overload, short circuit and temperature rise
Adjustable blocking time for sending status objects after restart and bus voltage recovery
Integrated 8-bit scene control, linking of the output in up to 8 scenes
Additional night mode object for time-limited switching on the output at night
Post-triggering of the On period (On period extension) in time switch mode up to a selectable maximum On period extension via repeated (2x, 3x, 4x, 5x) post-triggering
Selectable warning signal prior to imminent switching-off by brief off and on switching (flashing) or by cutting the current dimming value in half at night or in time switch mode
Selectable counting with threshold monitoring: operating hours, load cycles
